2006 Toyota Aygo

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i))

Power steering inoperative (2.1.5 (c) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output Both headlights (4.1.4 (b))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner/outer sill (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner/outer sill (6.1.1 (c) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material Both sides corroded (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear brake slightly binding

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside brake disc in such a condition that it is seriously weakened (3.5.1i)

Temporary fuel cap fitted

offside front tyre wearing on inner and outer edge