2010 Honda Civic

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front and rear undertrays insecure

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre slightly damaged sidewall (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect dip beam (4.1.2 (c))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect dip beam (4.1.2 (c))

Nearside Front Tyre slightly damaged sidewall (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle (5.3.6 (a) (i))

Nearside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Offside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Side repeater not working (1.4.A.2c)

Nearside Rear Inner Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside front tyre cracked.

Nearside rear tyre stepped inner edge.

Offside Rear Inner Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside front tyre cracked.

Nearside Headlamp aim too high and too far to the right. (1.8)

Nearside Rear Inner Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside front tyre cracked.

Nearside rear tyre stepped inner edge.

Offside Headlamp aim too low and too far to the right. (1.8)

Offside Rear Inner Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside front tyre cracked.

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components