2013 Fiat Doblo

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords Wall (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension component pin or bush excessively worn lower (5.3.4 (a) (i))

Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Offside Rear Suspension arm pin or bush excessively worn lower (5.3.4 (a) (i))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Front Position lamp not working x2 (4.2.1 (a) (ii))

Front Service brake excessively fluctuating x2 (1.2.1 (e))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside front tyre worn on edges

ns mirror cracked

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 1956016c (4.1.D.1a)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp not working on main beam (1.7.5a)

both front tyres worn on edges

ns mirror cracked

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater not working (1.4.A.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)