2005 Toyota Corolla

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases mid-section (6.1.2 (a))

NSR + OSR brake pipes slightly corroded

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view small crack at bottom (3.2 (a) (i))

parking brake lever has little reserve travel

rear inner sills corroded

temporary fuel filler cap fitted

underside of vehicle rusty

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e)) DANGEROUS

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Engine covers fitted obscuring some components in the engine bay

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Engine covers fitted obscuring some components in the engine bay

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Engine covers fitted obscuring some components in the engine bay

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

Play in steering rack inner joint(s)

engine management lamp illuminated

vcs (traction control warning lamp) illuminated

Parking brake lever has little reserve travel (3.1.6b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)