2007 Ford Focus C-max

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake disc in such a condition that it is seriously weakened inner surface (1.1.14 (a) (ii)) DANGEROUS

corrosion around - rear sub frame,rear suspesnion arms,offside rear brake pipes

edge wear on both front tyres

rear exhaust bracket corroded and broken

rear exhaust heat shield becoming loose

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer not working (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

rear brake flexi pipe covers spliting ,corrosion in front discs

buckle in n/s/r inner wheel rim..

corrosion around - front brake discs,rear flexi brake hose ferrules,front coil springs..

front brake pads 3/4 worn..

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

buckle in n/s/r inner wheel rim..

corrosion around - front brake discs,rear flexi brake hose ferrules,front coil springs..

front brake pads 3/4 worn..

Front Suspension arm has excessive play in a pin/bush both(rearwards)LOWER ARMs bushs.. (2.4.G.2)

Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure out of shape (4.1.D.1b)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

O/S/F AND O/S/R TYRES W O R N VERY LOW ON TREAD..

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin only just (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Valve stem slightly damaged (4.1.D.1e)

Nearside Front Valve stem seriously damaged (4.1.D.1e)

Offside front brake binding (3.7.B.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Valve stem slightly damaged (4.1.D.1e)

Both front headlamp glass becoming hazey but aim image still ok?.

Child seat fitted not allowing full inspection of adult belt

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)