2008 Toyota Aygo

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

All direction indicators not working (4.4.1 (a) (ii))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill. (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Tyre has ply or cords exposed Inner edge. (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened Inner disc edges are corroded on both sides front. (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Worn on the inner edge. (5.2.3 (e))

Rear Exhaust has a minor leak of exhaust gases Silencer. (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened And covered in underseal. (5.3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Central Exhaust system insecure (6.1.2 (a))

Nearside Front Lower Steering locking device missing Ball joint. (2.1.3 (d))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Steering locking device missing Track rod end. (2.1.3 (d))

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner and outer sill. within the rear axle mounting. (5.3.6 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened And covered in underseal. (5.3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust mounting defective Center (6.1.2 (a))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill requires attention (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill requires attention (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear tyre becoming worn to wear indicators

front brake discs badly corroded

Offside Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)