2009 Hyundai I10

Nearside Front Headlamp aim unable to be tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim too high and too far to the left. (4.1.2 (a))

Offside Windscreen washer not working (3.5 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Coolant leak radiator ()

Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Emissions not tested (7.0)

Nearside Front Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

front chassis legs slightly damaged

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

front chassis legs slightly damaged