2015 Keeway Tx

Headlamp aim too low (4.1.2 (a))

Brake lever is so short that the brake cannot be readily applied broken with sharp end (1.1.2 (d))

Clutch lever shortened so it cannot be readily operated Broken with sharp end (6.2.7 (b))

Headlamp aim too low (4.1.2 (a))

Offside Rear Brake lever pivot excessively worn (1.1.1 (b))

Rear Brake excessively binding 15-20KgF (1.2.1 (f))

Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Horn not working (7.7 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear rear brake pedal has slight movement in bush

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Clutch lever shortened (6.2.7 (b))

Front Brake pedal is short but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))