2008 Toyota Aygo

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes on both sides (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes on both sides (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill/jacking point (6.2.2 (d) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes on both sides (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Headlamp aim too high adjusted (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounts (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount (5.3.6 (a) (i))

Front Macpherson strut corroded but not seriously weakened both (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded to flexi (3.6.B.2c)

Nearside Front Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Both rear tyres have cracks in tread rubber that do not appear to be down to ply or cords

Nail in offside rear tyre

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

front disc corrosion