MOT Status
ValidMileage
98,250 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill. (5.3.6 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill. (5.3.6 (a) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive Engine. (8.4.1 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Headlamp insecure (4.1.1 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill. (5.3.6 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge Edge. (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill. (5.3.6 (a) (i))
Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive Engine. (8.4.1 (a) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside front track rod end slight play
Offside front lower ball joint slight play
Central Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Play in steering rack inner joint(s)
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule NS/OS (1.1.12 (f) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
plastic covers under vehicle
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Rear Brake pad(s) wearing thin (3.5.1g)
tpms light on dash (pre 2012)
Rear Brake pad(s) wearing thin (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
tpms light on dash (pre 2012)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake hose twisted (3.6.B.4c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Valve stem seriously damaged (4.1.D.1e)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
How Reliable is the Chrysler Sebring?
Based on 30,426 MOT tests across 2,563 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NV59 LMJ is a 2009 Chrysler Sebring in Silver with a 2,736cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2009 Chrysler Sebring models, the average MOT pass rate is 73.4% with a typical mileage of 59,751 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler Sebring fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,331 recorded failures. If you're considering buying NV59 LMJ, it's worth having these areas checked by a mechanic before committing.
The Chrysler Sebring typically stays on UK roads for around 19 years. At 17 years old, this Chrysler Sebring is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of NV59 LMJ?
You can check the full history of NV59 LMJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NV59 LMJ registered?
NV59 LMJ is a 2009 Chrysler Sebring, first registered on 30 November 2009.
Is NV59 LMJ safe to buy?
The MOT history for NV59 LMJ shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NV59 LMJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NV59 LMJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.