2010 Hyundai I20

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Nail in tyre ()

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Heat shield insecure

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing corrosion (5.3.2 (b))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing corrosion (5.3.2 (b))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

undertray and seal covered

Brake pipe corroded, covered in grease or other material All metal brake pipes corroded (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Lipped (1.1.14 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened Lipped (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material All metal brake pipes corroded (1.1.11 (c))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Brake pipe corroded, covered in grease or other material Both sides front to rear (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

n/s outer CV boot deteriorated

n/s/f tyre 3mm

Reversing lamp inoperative (4.6.1 (a))

n/s outer CV boot deteriorated

n/s/f tyre 3mm

Nearside Front CV Boot deteriorated but still preventing the ingress of water

Battery insecure (1.9.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Park brake just met legal requirements 16%

Rear Brake pad(s) wearing thin (3.5.1g)

both front tyre's slightly wearing on inner and outer edge