2004 Iveco Tipper

Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides d bushes (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive both side chassis (5.3.6 (a) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Inner Coil spring mounting corroded but not seriously weakened wheel arch and under bonnet (5.3.1 (b) (i))

Nearside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill and step (7.1.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both bushes (5.3.4 (a) (i))

Nearside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill and doorframe (7.1.1 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both bushes (5.3.4 (a) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis front and rear mount (5.3.6 (a) (i))

Nearside Rear light lens cracked

Offside Front Inner Coil spring mounting corroded but not seriously weakened wheel arch and under bonnet (5.3.1 (b) (i))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill and step (7.1.1 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both bushes (5.3.4 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill and doorframe (7.1.1 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both bushes (5.3.4 (a) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis front and rear mount (5.3.6 (a) (i))

Offside Rear light lens cracked

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides d bushes (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both side chassis (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbones both sides (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both tyres (5.2.3 (e))

Front Upper Suspension arm pin or bush worn but not resulting in excessive movement btoh sides (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated and lower has small cut (5.3.4 (b) (i))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated and lower has small cut (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides going to flexis (1.1.11 (c))

Rear light lens cracked both sides

tipper body corroded and taped up

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre box section within 30 cms of n/s rear top shock mount (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Bonnet safety catch seized.

Brake load sensing valve stiff (1.1.17 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Different size tyres on front and rear axles.

Indicator switch faulty (4.4.2 (a) (i))

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake pipe excessively corroded load valve to hose (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis ( near anti roll bar bracket mount) (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake hose has slight corrosion to ferrule rear hose from load valve to splitter (1.1.12 (f) (i))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside parking brake low effort

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

different size tyres on front axle to rear

protective plate under front subframe corroded

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material painted (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords outer sidewall (5.2.3 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

brake back plate missing o/s/r

different sized tyres fitted front and rear axles

Nearside front brake pipe painted

Nearside Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside front brake pipe painted

Offside Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated TOP WISHBONE BALL JOINT (5.3.4 (b) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Non obligatory mirror damaged

Oil leak

Spare tyre defective

Non obligatory mirror damaged

Oil leak

Rear registration plate insecure (6.3.1b)

Spare tyre defective

Rear Brake pipe slightly corroded (3.6.B.2c)

n/s mirror damaged

rear lamps cracked

steering wheel and drivers seat badly damaged

Battery insecure (1.9.1)

Brake pipe excessively corroded fron to rear (3.6.B.2c)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake pipe leaking (3.6.A.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Gearbox mounting defective

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

nearside mirror loose

slight brake bind offside front

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Stop lamp emits other than a steady red light (1.2.1e)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear fog lamp not working (1.3.2b)

Rear Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Gearbox mounting defective

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

nearside mirror loose

slight brake bind offside front

tipper bed support beams corroded away

all but one rear mudguard not fitted to vehicle due to corrosion and the one remaining is insecure also due to corrosion

Body has a sharp edge caused by corrosion (6.1.C.1)

Brake load sensing valve seized (3.6.E.3)

Brake valve retaining device missing (3.6.A.2d)

Nearside Front Obligatory mirror insecure (8.1.1)

Nearside Rear Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)

Rear fog lamp not working (1.3.2b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

oil light flashing

mud gaurds corroded away + no longer fitted to vehicle

o/s/f brake binding

tipper body very badly corroded, nothing left of support beams in places.

Brake load sensing valve defective and function impaired (3.6.E.3)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Rear Tyre incorrectly seated on the wheel rim (4.1.D.1d)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

front brake discs corroded

front brakes imbalanced

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

rear brake discs worn

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

o/s/f brake discs pitted

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)