2005 Iveco Daily

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger (5.3.6 (a) (i))

Nearside front tyre wearing on outer edge

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger/inner arch (5.3.6 (a) (i))

Offside rear tyre wearing on edges

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger (5.3.6 (a) (i))

Nearside front tyre wearing on outer edge

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger/inner arch (5.3.6 (a) (i))

Offside rear tyre wearing on edges

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust has a minor leak of exhaust gases front joint to silencer box (6.1.2 (a))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt track rod ends (2.1.3 (g) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all front mounts (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all rear leaf mounts (5.3.6 (a) (i))

Exhaust fumes entering cabin tail pipe missing (6.1.2 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust has a minor leak of exhaust gases front joint to silencer box (6.1.2 (a))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Rear Brake hose slightly twisted (1.1.12 (b) (i))

Offside Rear Tyre slightly damaged/valve stem damaged (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt track rod ends (2.1.3 (g) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all front mounts (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all rear leaf mounts (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak ()

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Oil leak ()

Offside Front Outer Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Outer Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake fluid warning lamp illuminated (3.6.G.2)

Brake load sensing valve linkage seized (3.6.E.3)

Horn not working (1.6.2a)

Indicator switch faulty (1.4.A.1)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Oil leak

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

brake anti slip slightly worn

n/s/f marker light not working

sills have plastic trim covers

Brake load sensing valve seized (3.6.E.3)

Front Brakes imbalanced across an axle (3.7.B.5b)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Indicator switch faulty (1.4.A.1)

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Suspension component mounting prescribed area is fractured (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pedal rubber slightly worn.

Chassis in general showing signs of corrosion.

Key broken in ignition.

O/s front and rear indicator lenses cracked.

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Oil leak

Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Rear brake disc backplates corroded.

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear door hinges worn.

both front cab / body mounts collapsed

rear spring eye bushes starting to wear

Brake load sensing valve linkage obviously incorrectly adjusted (3.6.E.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Leaf spring to axle securing nut insecure (2.4.B.7b)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Lower Shock absorber detached (2.7.2b)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Side repeater incorrect colour (1.4.A.2f)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

bonnet safety catch seized & in-op

both front cab / body mounts collapsed

both rear indicator bulbs fasing & o/s/r lense cracked

n/s/f indicator & side repeater bulbes fading

rear spring eye bushes starting to wear

Offside Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside rear brake recording little or no effort (3.7.B.5a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Gap between axel and leef spring, U bolts appear to be tite

Nearside Side repeater slightly discoloured (1.4.A.2f)

Nearside rear bump stop missing

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Side repeater slightly discoloured (1.4.A.2f)

Park brake needs ajusting

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Horn not working (1.6.2a)

Nearside Rear Direction indicators adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

brake warning light on

Nearside Rear Rear position lamp(s) incomplete (1.1.4a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Side repeater slightly discoloured (1.4.A.2f)