2004 Mazda Premacy

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg (7.1.1 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut tower/inner wheel arch (5.3.6 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front wing heavily corroded

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

boot floor corroded

front radiator support heavily corroded

sump pan heavily corroded

Front Suspension component mounting prescribed area is corroded but not considered excessive sub frame (2.4.A.3)

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front wings heavily corroded

Offside Front Wheel arch edge heavily corroded, not broken away as yet.

Nearside Rear Suspension component mounting prescribed area is excessively corroded Behind plastic sill trim, full extent hidden (2.4.A.3)

Offside Front Wheel arch edge heavily corroded, not broken away as yet.

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit outer edge (4.1.E.1)

Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing/suspension mount (2.4.A.3)

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit outer edge (4.1.E.1)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Offside Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Offside Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine sump corroded

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine sump corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Torsion bar slight play at an end fixing (2.4.E.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nail in offside rear tyre