MOT Status
ExpiredMileage
295,478 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all body mounts slightly corroded (6.2.2 (d) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security in wheel arch (6.2.2 (d) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mount (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security in wheel arch (6.2.2 (d) (i))
Offside Front Lower Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))
Offside Front Nail in tyre ()
Offside Front Sub-frame damaged but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mount (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear both rear leaf springs slightly splayed
Vehicle structure is corroded but structural rigidity is not significantly reduced all rear chassis (6.1.1 (c) (i))
bonnet catch requires attention
vehicle loadbed dropsides slightly loose but secure
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all body mounts slightly corroded (6.2.2 (d) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security in wheel arch (6.2.2 (d) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mount (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security in wheel arch (6.2.2 (d) (i))
Offside Front Lower Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))
Offside Front Nail in tyre ()
Offside Front Sub-frame damaged but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mount (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear both rear leaf springs slightly splayed
Vehicle structure is corroded but structural rigidity is not significantly reduced all rear chassis (6.1.1 (c) (i))
bonnet catch requires attention
vehicle loadbed dropsides slightly loose but secure
Body component slightly loose all drop sides damaged but secure (6.2.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
all rear brake pipes greased
secondary bonnet catch requires attention
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting bracket (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at front of rear crossmember, adjacent to upper damper mount. (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/lower seat belt mount. (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at front of rear crossmember, adjacent to upper damper mount (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Body component likely to become detached load side screen (6.2.1 (a) (ii)) DANGEROUS
Offside Body component likely to become detached load side screen (6.2.1 (a) (ii)) DANGEROUS
Body component slightly loose all drop sides damaged but secure (6.2.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
all rear brake pipes greased
secondary bonnet catch requires attention
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps main beam unable to be operated interdependently of dipped beam. (4.1.3 (b))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member above rear axle. (6.1.1 (c) (i))
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering leaf spring hanger (6.1.1 (c) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material all pipe around axle covered in thick grease (1.1.11 (c))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Inner Nail in tyre ()
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen wiper blade defective (3.4 (b) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
underbody has general age related corrosion
welding repairs coated in sealant
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 'Arch' (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 'Arch' (5.3.6 (a) (i))
Nearside Rear Leaf spring main leaf fractured (5.3.1 (b) (ii)) DANGEROUS
Offside Rear Leaf spring main leaf fractured (5.3.1 (b) (ii)) DANGEROUS
'General age related corrosion under body'
Brake pipe corroded, covered in grease or other material 'Front to rear' (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 26% (1.2.1 (b) (i))
Central Registration plate lamp not working x2 (1.1.C.1d)
Front Brakes imbalanced across an axle 39% (3.7.B.5b)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Side repeater incorrect colour (1.4.A.2f)
Nearside front brake binding (3.7.B.1)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Speedometer cannot be illuminated. (6.7.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Inner tyre as a nail in the sidewall
oil leak
tow coupling not fitted
Engine covers fitted obscuring some components in the engine bay
Front Direction indicators slightly discoloured (1.4.A.2f)
Items removed from driver's view prior to test
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Side repeater slightly discoloured (1.4.A.2f)
Nearside Indicator switch faulty (1.4.A.1)
Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Side repeater slightly discoloured (1.4.A.2f)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp not working (1.3.2b)
air bag warning light on
dip/main beam switch
rear brake imbalance
Engine covers fitted obscuring some components in the engine bay
air bag warning light on
dip/main beam switch
rear brake imbalance
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
airbag light on
Horn not working (1.6.2a)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
airbag light on
Battery insecure
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Side repeater slightly discoloured (1.4.A.2f)
Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front roof marker lights not working
Nail in offside rear tyre
Offside Upper Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nail in offside rear tyre
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Offside Upper Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Iveco Daily 35 C12 LWB?
Based on 3,745 MOT tests across 242 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NX55 ETK is a 2005 Iveco Daily 35 C12 LWB in White with a 2,300cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2005 Iveco Daily 35 C12 LWB models, the average MOT pass rate is 68.4% with a typical mileage of 140,823 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily 35 C12 LWB fails its MOT is parking brake: efficiency below requirements, accounting for 184 recorded failures. If you're considering buying NX55 ETK, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily 35 C12 LWB typically stays on UK roads for around 21 years. At 21 years old, this Iveco Daily 35 C12 LWB is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of NX55 ETK?
You can check the full history of NX55 ETK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NX55 ETK registered?
NX55 ETK is a 2005 Iveco Daily 35 C12 LWB, first registered on 26 September 2005.
Is NX55 ETK safe to buy?
The MOT history for NX55 ETK shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NX55 ETK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NX55 ETK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.