2009 Iveco Daily

All outline marker lamps not working (4.2.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Position lamp not working (4.2.1 (a) (ii))

Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Front Sub-frame attachment bracket/mounting likely to become detached BOTH SIDES DAMAGED (5.3.3 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Power steering component has slight seepage from a component PUMP (2.1.5 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Brakes imbalanced across an axle 42% (1.2.1 (b) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Windscreen washer not working (3.5 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

BONNET NOT OPEN

Power steering component has slight seepage from a component PUMP (2.1.5 (a))

Rear Service brake binding but not excessively BOTH SIDES (1.2.1 (f))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Nearside Outline marker lamp does not illuminate simultaneously with the position lamps all (4.2.2 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Upper Outline marker lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Rear All outline marker lamps missing broken off (4.2.1 (a) (ii))

Rear Anti-roll bar pin or bush excessively worn d shape both sides (5.3.4 (a) (i))

Rear Body component insecure doors on tipper (6.2.1 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Windscreen washer not working (3.5 (a))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

general corrosion underneath

Front Seat belt anchorage prescribed area strength or continuity significantly reduced both (7.1.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

general corrosion underneath

damage all round the vehicle

general corrosion underneath

damage to n/s and o/s of vehicle

general corrosion underneath

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

clutch pedal anti-slip provision mising

Offside Rear Body has a sharp edge caused by corrosion body side panels (6.1.C.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Rear Body has a sharp edge caused by corrosion body side panels (6.1.C.1) DANGEROUS

Offside Rear Body has a sharp edge caused by corrosion side panels (6.1.C.1) DANGEROUS

Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Outer Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

n/s side marker light not working

rear tipper body floor corroded and holed

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Body has a sharp edge caused by corrosion side hinge (6.1.C.1)

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Sub-frame severely distorted (2.4.G.1)