2010 Honda Civic

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement o/s and n/s (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output o/s and n/s (4.1.4 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake hose has slight corrosion to ferrule o/s and n/s (1.1.12 (f) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sills o/s and n/s (5.3.6 (a) (i))

Rear suspension components corroded

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement o/s and n/s (5.3.4 (a) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt o/s and n/s (2.1.3 (g) (i))

Headlamp has a product on the lens but not seriously reducing light output o/s and n/s (4.1.4 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule o/s and n/s (1.1.12 (f) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sills o/s and n/s (5.3.6 (a) (i))

Rear suspension components corroded

Exhaust mounting defective (6.1.2 (a))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt o/s and n/s (2.1.3 (g) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Tyre obviously under inflated (5.2.3 (l))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule o/s and n/s (1.1.12 (f) (i))

corrosion to - o/s and n/s rear inner sills

rear shocks corroded o/s and n/s

Exhaust mounting defective (6.1.2 (a))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt o/s and n/s (2.1.3 (g) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre obviously under inflated (5.2.3 (l))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule o/s and n/s (1.1.12 (f) (i))

corrosion to - o/s and n/s rear inner sills

rear shocks corroded o/s and n/s

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre slightly damaged/cracking or perishing o/s and n/s (5.2.3 (d) (ii))

Rear Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt o/s and n/s front (2.1.3 (g) (i))

both rear shocks corroded

exhaust mount corroded/broken

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement o/s and n/s (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre slightly damaged/cracking or perishing o/s and n/s (5.2.3 (d) (ii))

Rear Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt o/s and n/s front (2.1.3 (g) (i))

both rear shocks corroded

exhaust mount corroded/broken

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Exhaust mounting defective (6.1.2 (a))

plastic covers fitted obscuring some under body components

rear beam axle corroded

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Exhaust mounting defective (6.1.2 (a))

plastic covers fitted obscuring some under body components

rear beam axle corroded

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

plastic covers fitted obscuring some under body components

rear beam axle corroded

Nearside Front Outer Drive shaft joint excessively worn (6.1.7 (c) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Drive shaft joint excessively worn (6.1.7 (c) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

plastic covers fitted obscuring some under body components

rear beam axle corroded

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Offside Front Upper Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Side repeater slightly dim

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Offside Front Upper Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Side repeater slightly dim

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front tyre worn on outer edge

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Side repeater has less than 50% of the light sources illuminating (1.4.A.2c)

Offside Front Headlamp not working on main beam (1.7.5a)

undertrays fitted

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

undertrays fitted