MOT Status
ExpiredMileage
71,557 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Fuel pipe/s corroded
Offside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust system not adequately supported (7.1.1)
Fuel pipe/s corroded
Nail in nearside rear tyre
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Upper coil spring cracked (2.4.C.1a)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
the rear gearbox mounting is seperating
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper blade insecure (8.2.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Windscreen wiper blade insecure (8.2.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
the rear gearbox mounting is seperating
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Ball joint has excessive play (2.2.B.1f)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front coil spring incomplete (2.4.C.1a)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
front brake discs wearing thin
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear coil spring corroded (2.4.C.1b)
front brake discs wearing thin
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
The near side front wing has a plastic trim which is part insecure as the result of accident damage and should have it's clips replaced.
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
NY06 CNC is a 2006 Ford Ka in Yellow with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying NY06 CNC, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of NY06 CNC?
You can check the full history of NY06 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was NY06 CNC registered?
NY06 CNC is a 2006 Ford Ka, first registered on 30 June 2006.
Is NY06 CNC safe to buy?
The MOT history for NY06 CNC shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does NY06 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on NY06 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.