MOT Status
ExpiredMileage
207,223 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair lagging slightly in operation (1.2.1 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i))
Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Horn not working (7.7 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Bumper mountings corroded but not likely to become detached cross member (6.1.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Tyre worn close to legal limit/worn on edge both rear tyres very low on inner edges 205/55/16 (5.2.3 (e))
both inner & outer sill corroded
rear floor corroded
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Tyre worn close to legal limit/worn on edge both rear tyres very low on inner edges 205/55/16 (5.2.3 (e))
both inner & outer sill corroded
rear floor corroded
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure has slight corrosion floor (6.1.B.2)
Nearside Front position lamp(s) not working flickering on and off (1.1.A.3b)
Nearside Registration plate lamp not working flickering on and off (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement front bush (2.4.G.2)
Offside Front position lamp(s) not working flickering on and off (1.1.A.3b)
Offside Registration plate lamp not working flickering on and off (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Offside Rear Parking brake lever has little reserve travel (3.1.6b)
Offside Rear parking brake minimum standard
Offside Rear Parking brake lever has little reserve travel (3.1.6b)
Offside Rear parking brake minimum standard
Offside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Off side rear wheel starting to bind slightly
Nearside Headlamp aim too low (1.8)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp aim too low (1.8)
o/s frt wheel slight bind
How Reliable is the Honda Civic?
Based on 9,391,580 MOT tests across 693,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
OE04 WYW is a 2004 Honda Civic in Black with a 1,590cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2004 Honda Civic models, the average MOT pass rate is 74.2% with a typical mileage of 74,453 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 307,913 recorded failures. If you're considering buying OE04 WYW, it's worth having these areas checked by a mechanic before committing.
The Honda Civic typically stays on UK roads for around 34 years. At 22 years old, this Honda Civic is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of OE04 WYW?
You can check the full history of OE04 WYW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was OE04 WYW registered?
OE04 WYW is a 2004 Honda Civic, first registered on 10 June 2004.
Is OE04 WYW safe to buy?
The MOT history for OE04 WYW shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does OE04 WYW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on OE04 WYW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.