2004 Honda Civic

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm ball joint dust cover severely deteriorated Both (5.3.4 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive Both (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both (6.1.1 (c) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Macpherson strut corroded but not seriously weakened Both (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Shock absorbers light misting of oil or has limited damping effect both (5.3.2 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Track rod end ball joint has slight play both (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Bonnet primary retaining device insecure (3.1 (c))

Brake servo defective or ineffective (1.1.10 (a) (i))

Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii))

Front Obligatory mirror missing (3.3 (a))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front All position lamps light intensity obviously reduced (4.2.3 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Fuel Pipe/s corroded ()

corrosion underbody

rear shocks corroded

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security too rear floor (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side inner and outer sills (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear axle (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear wheel arch (6.2.2 (d) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis (6.2.2 (d) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Shock absorbers has slight external damage to the casing rear shock absorbers corroded (5.3.2 (b))

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit inside edge (4.1.E.1)

Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit inside edge (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' base of windscreen (8.3.1d)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

BONNET PULL HANDLE BROKEN

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)