2008 Honda Civic

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

covers + shields fitted

under vehicle + all steering / suspension components corroded

Front Suspension component ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords + heavily cracking (5.2.3 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Nearside Side repeater lens defective such that the emitted light is adversely affected sharp edges / tapped over (4.4.1 (b) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

covers + shields fitted

under vehicle + all steering / suspension components corroded

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

covers + shields fitted

under vehicle + all steering / suspension components corroded

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Side repeater lens defective such that the emitted light is adversely affected sharp edges / tapped over (4.4.1 (b) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

covers + shields fitted

under vehicle + all steering / suspension components corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Inner Tyre worn close to legal limit/worn on edge both sides / offside close to limit (5.2.3 (e))

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

covers + shields fitted

under vehicle + all steering / suspension components corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Inner Tyre worn close to legal limit/worn on edge both sides / offside close to limit (5.2.3 (e))

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

covers + shields fitted

under vehicle + all steering / suspension components corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

covers + shields fitted

under vehicle / all steering + suspension components corroded

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Slightly noisey

Both front tyres close to legal limit.

N/S/F tyre has cuts to inner sidewall.

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Under-trays fitted obscuring some underside components

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Under-trays fitted obscuring some underside components

split in nsr tyre inner sidewall

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

split in nsr tyre inner sidewall

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)