2012 Jeep Wrangler

Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush - both sides (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component corroded but not seriously weakened ALL (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive ALL (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Side repeater incorrect colour lens broken (4.4.3 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm 245-75-17 (5.2.3 (e)) DANGEROUS

Brake hose has slight corrosion to ferrule ALL (1.1.12 (f) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush - both (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck

Nearside Front Tyre worn close to legal limit/worn on edge on 2.2mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge on 1.8mm (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component corroded but not seriously weakened ALL components (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive ALL mounting (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Fuel Pipe/s corroded Filler Neck

Nearside Front Suspension arm ball joint has slight play Upper and Lower (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 245-75-17 (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play Upper and Lower (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 245-75-17 (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component corroded but not seriously weakened All Components (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive All Mountings (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Upper Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Seat belt webbing significantly weakened cut from edge greater than 2mm (7.1.2 (b))

Fuel Pipe/s corroded filler neck

Nearside Front Suspension arm ball joint has slight play upper and lower (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 245-75-17 (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play upper and lower (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component corroded but not seriously weakened ALL components (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive ALL mountings (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Fuel Pipe/s corroded filler neck

Nearside Front Suspension arm ball joint has slight play upper and lower (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play upper and lower (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Passenger seat(s) missing at time of test ALL

Suspension component corroded but not seriously weakened several components and all mountings (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Fuel Pipe/s corroded filler neck

Rear Passenger seat(s) missing at time of test all

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect kick up wrong way (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect kick up wrong way (4.1.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Fuel Pipe/s corroded filler neck

Rear Passenger seat(s) missing at time of test all

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Passenger seat(s) missing at time of test

Nearside Headlamp aim projected beam image is obviously incorrect kick up on wrong side (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect kick up on wrong side (4.1.2 (c))

Rear Passenger seat(s) missing at time of test

Rear Passenger seat(s) missing at time of test all

Rear Passenger seat(s) missing at time of test all

Windscreen wiper does not clear the windscreen effectively both 16 (3.4 (b) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Passenger seat(s) missing at time of test

Rear Passenger seat(s) missing at time of test

Tyre pressure monitoring system warning lamp indicates a fault (5.2.3 (h) (i))