2003 Volvo S80

Anti-roll bar pin or bush worn but not resulting in excessive movement Both rear bushes (5.3.4 (a) (i))

Drive shaft joint constant velocity boot severely deteriorated Both front inner (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Rear registration plate faded but not likely to be misread (6.3.1d)

dash indicates a fault but none found

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate faded but not likely to be misread (6.3.1d)

dash indicates a fault but none found

sill covers fitted covering testable items

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush slight (2.4.G.2)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt cracking (2.5.C.1a)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt cracking (2.5.C.1a)

Offside Power steering component(s) has slight seepage from a component reservoir pipe (2.3.3b)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate insecure (6.3.1b)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt cracking (2.5.C.1a)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt cracking (2.5.C.1a)

Offside Power steering component(s) has slight seepage from a component reservoir pipe (2.3.3b)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Lower Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

rear exhaust bracket broken but exhaust still secure

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

rear exhaust bracket broken but exhaust still secure

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)