2006 Ford Ka

Coil spring fractured or broken BOTH SIDE FRONT BROKEN (5.3.1 (b) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Lower Suspension arm pin or bush excessively worn REAR BUSH (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn REAR BUSH (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Nearside Floor in such a condition it is likely to cause load insecurity or instability (6.2.4 (a) (ii)) DANGEROUS

Offside Floor in such a condition it is likely to cause load insecurity or instability (6.2.4 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

both side sills rusting in places

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

both side sills rusting in places

BOTH OUTER SILLS GETTING RUSTY IN PLACES

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Sub-frame pin or bush worn but not resulting in excessive movement both side rear (5.3.4 (a) (i))

under vehicle rusting in places

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Sub-frame pin or bush worn but not resulting in excessive movement both side rear (5.3.4 (a) (i))

under vehicle rusting in places

Axle swivel pins and bushes swivel pin and/or bush slightly worn both side rear (5.1.2 (b) (i))

under vehicle starting to rust in places

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Nearside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Axle swivel pins and bushes swivel pin and/or bush slightly worn both side rear (5.1.2 (b) (i))

under vehicle starting to rust in places

Offside Headlamp aim too high and too far to the right. (1.8)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nail in offside front tyre

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Obligatory mirror insecure (8.1.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)