2013 Mercedes-benz Vito

Exhaust mounting defective middle and rear clamps missing (6.1.2 (a))

Fluid leak, but not excessive coolant (8.4.1 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Exhaust mounting defective middle and rear clamps missing (6.1.2 (a))

Fluid leak, but not excessive coolant (8.4.1 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

front diff bushes split

Central exhaust clamp missing

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear diff bushes split

Brake lever has abnormal movement of levers indicating excessive wear or maladjustment parking brake (1.1.15 (f))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central exhaust clamp missing

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Rear diff bushes split

rear diff mountings split

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear diff mountings split

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

differential bushes worn

Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

differential bushes worn

Central Exhaust silencer slightly loose box clamp is missing (8.1.1 (b) (i))

Central Rear Seat belt not functioning as intended (7.1.2 (c))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Seat belt not functioning as intended (7.1.2 (c))

Offside Front Headlamp aim too high (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Reversing lamp inoperative (4.6.1 (a))

Central Exhaust silencer slightly loose box clamp is missing (8.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge plus cuts in tread (5.2.3 (e))

Rear diff bushes worn

Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge plus cuts in tread (5.2.3 (e))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear diff bushes worn

Front Exhaust mounting defective (6.1.2 (a))

Rear axle bushes worn

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Rear axle bushes worn

Nearside Rear Nail in tyre ()

Offside Rear Nail in tyre ()

Rear Inner Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)