2005 BMW 320

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Rear Oil leak, but not excessive Differential (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Rear Oil leak, but not excessive Differential (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

General corrosion underbody

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Underbody covered in under seal

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

General corrosion underbody

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Underbody covered in under seal

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Central Front Suspension component corroded and seriously weakened (5.3.3 (b) (i))

Central Rear Registration plate insecure (0.1 (a))

Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked with yellow (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked with yellow (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear All position lamps with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear All position lamps with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Items removed from driver's view prior to test ()

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

undertray loose but not likely to fall off