2005 BMW Z4

Electronic braking system warning device indicates a fault (1.7 (b))

Both front fog lights not working

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front fog lights not working

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Front fog lights not working

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Both front fog lights not working

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Brake lining(s) missing handbrake shoes missing (1.1.13 (c)) DANGEROUS

Both front fog lights not working

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear brake disc backing plate missing

Brake pipe corroded, covered in grease or other material various places (1.1.11 (c))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Nearside All direction indicators flashing more than 120 times a minute all (4.4.4 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

amber brake warning light displayed, all appears fine

parking brake effiency just met

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

amber brake warning light on

tyre pressure monitoring system light on

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

amber brake warning light on

tyre pressure monitoring system light on

Headlamp lens slightly defective both headlight lens poor (4.1.1 (b) (i))

Rear Brake pipe excessively corroded both main to rear (1.1.11 (c))

Headlamp lens slightly defective both headlight lens poor (4.1.1 (b) (i))

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Central Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

brake pad warning light on

Front brake disc worn, pitted or scored, but not seriously weakened very rusty (3.5.1i)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Tyre worn close to the legal limit both tyres (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened very rusty (3.5.1i)

bridgestone Potenza 225/40 R18

Front brake disc worn, pitted or scored, but not seriously weakened very rusty (3.5.1i)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Headlamp aim too low (1.8)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Tyre worn close to the legal limit both tyres (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened very rusty (3.5.1i)

Windscreen washer provides insufficient washer liquid (8.2.3)

bridgestone Potenza 225/40 R18

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

o/s/r tyre perished. Front brake pads worn to 1/4 remaining.

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)