1970 Volkswagen 1500

Central Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak ()

hazard light switch temperamental

Front Brake pad(s) wearing thin (3.5.1g)

front floor has slight corrosion

oil leak

Nearside Rear brake back plate damp

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area (2.4.A.3)

Nearside Seat belt anchorage prescribed area is inadequately repaired centre sill area (5.2.6)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area (2.4.A.3)

Offside Seat belt anchorage prescribed area is inadequately repaired centre sill area (5.2.6)

Rear Brakes imbalanced across an axle 38% (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Brake back plate damp

Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Exhaust has a major leak of exhaust gases exhaust very corroded and leaking in various places (7.1.2)

Horn not working (1.6.2a)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill panel (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high kick up too high (1.8)

Offside Rear Seat belt anchorage prescribed area is excessively corroded sill/floor panel in places (5.2.6)

Seat belt anchorage prescribed area is inadequately repaired n/s centre sill panel (5.2.6)

Seat belt anchorage prescribed area is inadequately repaired o/s centre sill panel (5.2.6)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' wiper park position (8.3.1d)

Windscreen washer provides insufficient washer liquid o/s and n/s (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. front brakes (3.7.B.5b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. rear brakes (3.7.B.5b)

Nearside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill panel (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch/floor panel (2.4.A.3)

Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

n/s/ f floor panel corroded,, recommend attention

n/s/r brake back plate damp,, recommend check

o/s and n/s rear shock absorbers have slightly reduced damping

oil leak

plates welded in rear of vehicle, unable to see condition of weld

nearside front lower ball joint is worn

nearside rear brake drum leaking fluid, offside front lower and nearside front top ball joint gators are split, engine is leaking oil, welding generaly is of poor quality, rear inner sills are blistered and weak

Front Mechanical brake component locking device insecure (3.5.1l)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

nearside front lower ball joint is worn

nearside rear brake drum leaking fluid, offside front lower and nearside front top ball joint gators are split, engine is leaking oil, welding generaly is of poor quality, rear inner sills are blistered and weak

Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside front brake binding (3.7.B.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) obscured more than 50% (1.1.A.3c)

Offside front brake binding (3.7.B.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

offside front floorpan holed, nearside front floorpan holed, both front inner archs corroded, engine burning oil, steering system worn, nearside front suspension excessively worn, nearside rear drum damp

offside rear brake noisy in operation

both running boards are corroded, both front inner arches are corroded, near side front upper ball joint gaiter is split and ball joint is worn, off side front wheel bearing has slight play

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)

both running boards are corroded, both front inner arches are corroded, near side front upper ball joint gaiter is split and ball joint is worn, off side front wheel bearing has slight play

Front Windscreen washer provides insufficient washer liquid (8.2.3)

front wipers are split, near side headlamp aim is poor, steering column is corroded, front shocker bushes are perished, near side front shocker is damp, off side front tyre is close to legal limit

near side and off side floor pan is corroded and holed

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

steering column and coupling corroded; both front shocker rubbers split; general corrosion chassis; corroded and holed off side front chassis (not prescribed area)

Brake imbalance to off side front

Front axle is blistered and very weak †Near side front inner wing is corroded and holed †Play in front suspension arms †Rear exhaust box is blowing †Off side jacking point, spare wheel carrier, near side and off side rear inner wings are corroded

Underside of vehicle has alot of rust.

Washers poor.

oil leak

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Underside of vehicle generally has alot of rust.

oil leak