2003 Audi A3

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Emissions not tested (7.4.B.1)

Front Exhaust has a major leak of exhaust gases broken at cat (7.1.2)

Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Direction indicators slightly discoloured (1.4.A.2f)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Engine covers fitted obscuring some components in the engine bay

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components

front cat/ exhaust pipe starting to deterioate

offside rear tyre inner wall starting to split/crack , cords not exposed at time of test

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear coil spring incomplete (2.4.C.1a)

Engine lower cover is fitted

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Nearside front brake disc is slightly corroded

Nearside rear brake disc is slightly corroded

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Direction indicators slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front brake disc is slightly corroded

Offside front wiper blade is deteroirated

Offside rear brake disc is slightly corroded

Power steering component(s) has slight seepage from a component (2.3.3b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front and nearside rear tyres close to wear limits

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)