2004 Yamaha TZR50

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Direction indicator insecure (1.5.3b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain excessively loose (6.2.1d)

Headlamp aim too low and too far to the right. (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Front wheel bearings have slight free play (2.3.5b)

Steering movement slightly stiff (2.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Brake locking device missing (3.2.A1e)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering headbearing has excessive free play (2.2.2)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering headbearing has slight free play (2.2.2)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Headlamp aim too high (1.6)

Offside Headlamp aim too low (1.6)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Main beam repeater not fitted.

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)