2003 Audi A3

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Tailgate cannot be secured in the closed position (6.2.1 (e))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Service brake fluctuating, but not excessively (1.2.1 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Headlamp levelling device inoperative (4.1.5 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Drive shaft joint excessively worn (6.1.7 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn Rear bush. (5.3.4 (a) (i))

Bonnet retaining device ineffective (8.4.2)

Rear fog lamp not working (1.3.2b)

Nearside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak ()

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Headlamp aim too low (1.8)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Stop lamp not working (1.2.1b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Headlamp aim too low (1.8)

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

drivers seat slightly insecure in position, (rocks)

Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Steering lock warning lamp indicates a fault (2.1.4c)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

two child-seats occupy adult seats rear row

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Direction indicator not working (1.4.A.2c)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

two child-seats occupy adult seats rear row

Child seat fitted not allowing full inspection of adult belt

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

n/s/f tyre outer wall curb damaged.

Child seat fitted not allowing full inspection of adult belt

Front Headlamp aim too low (1.8)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

n/s/f tyre outer wall curb damaged.

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Stop lamp not working (1.2.1b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Stop lamp not working (1.2.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)