2006 Aprilia RS 50

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Indicator switch insecure (1.5.4)

Offside Direction indicators flashing more than 120 times per minute (1.5.1c)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Offside Rear Direction indicator damaged but function not impaired (1.5.3a)

dip/main beam switch works wrong way around

Front position lamp deteriorated and function impaired main beam very dull (1.1.1b)

Front suspension assembly component missing fork pinch bolt missing (2.3.1)

Offside Steering lock stop ineffective r/h lock starter button pressed by tank and clutch lever pulled in by fairing (2.1.3)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front position lamp damaged and function impaired painted black (1.1.1b) DANGEROUS

Front position lamp deteriorated and function impaired dip beam very dull (1.1.1b) DANGEROUS

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Offside Rear Direction indicator damaged but function not impaired (1.5.3a)

dip/main beam switch works wrong way around

Drive chain slightly loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Handlebar mounting clamp bolt loose (2.1.1a)

Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Drive chain slightly loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

front tyre has surface cracks on side wall but not to cords!

Drive chain excessively tight (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Headlamp aim headlamp damaged and function impaired (1.2.3a)