2006 Ducati S2R

Clutch lever shortened (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake hose slightly chafed (1.1.12 (b) (i))

Front Brake pad(s) close to minimum limit all (1.1.13 (a))

Offside oil cooler mounting missing

Rear Brake pedal is bent but brake can still be readily applied rear brake control lever (1.1.2 (d))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Tyre worn close to the legal limit middle of the tread (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Headlamp insecure (4.1.1 (c))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly scored (3.2.A1l)

play in rear wheel possible wheel bearing.

Steering movement slightly 'notchy' (2.2.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings have slight free play (2.3.5b)