2002 Audi A2

Brake lever has insufficient reserve travel (1.1.2 (a))

Headlamp aim too high both (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Stop lamp(s) not working (4.3.1 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Central Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Both rear suspension bump stops perished and split

Items removed from driver's view prior to test ()

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Both rear suspension bump stops perished and split

Items removed from driver's view prior to test ()

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Both rear suspension bump stops split in two

Items removed from driver's view prior to test ()

Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit at wear limit of 1.6mm (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Lower Coil spring not correctly located spring locator missing (2.4.C.2)

Offside Rear coil spring broken (2.4.C.1a)

Rear registration plate deteriorated (6.3.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure inner wall (4.1.D.1b) DANGEROUS

Both rear suspension bump stops split in two

Items removed from driver's view prior to test ()

Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit at limit of 1.6mm (4.1.E.1)

Both rear suspension bump stops perished and split

Nearside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit 1.8mm (4.1.E.1)

Removed items from drivers view prior to test

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar cracked (2.4.G.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Both rear suspension bump stops perished and split

Nearside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit 1.8mm (4.1.E.1)

Removed items from drivers view prior to test

Both rear suspension bump stops perished and split

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Registration plate lamp not working (1.1.C.1d)

Both rear suspension bump stops perished and split

Nearside headlamp has water in it

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too high (1.8)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.5c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

bodyworks has dent