2003 Mercedes-benz Vito

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded door (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Body has slight corrosion (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Oil leak ()

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Body has slight corrosion (6.1.B.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush d bush (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Fuel cap/sealing device missing (7.2.4a)

Body has slight corrosion (6.1.B.2)

Front bumper insecure

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear both tyres worn slightly on inner edge.

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear both tyres worn slightly on inner edge.

Nearside Front Brake hose stretched (found during steering lock to lock check) (2.2.D.2b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Front bumper insecure

Centre Exhaust system not adequately supported (7.1.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Registration plate lamp not working (1.1.5c)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front bumper insecure

o/s/r tyre air low

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Exhaust has a part missing (7.1.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Headlamp aim too low (1.8)

Offside Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

light surface rust on rear brake discs