2005 Toyota MR2

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

o/s/r quarter panel loose and corroded

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Body panel slightly loose and corroded (6.2.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Body panel slightly loose and corroded (6.2.1 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Body panel slightly loose and corroded (6.2.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Body panel slightly loose and corroded (6.2.1 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Rear door sill corroded

Offside Rear door sill loose and corroded

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear sill corroded

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear lower door sill loose and corroded

Nearside Rear Lower wing loose and corroded

Offside Rear Lower wing loose and corroded

all brake discs corroded

both top front strut areas corroded

coolant leak n/s/f

general rear underside and suspension componants corroded

head lamp lenses deteriorating but got beam image

underside covered in underseal

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wheel Arch (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Integral body structure is corroded but structural rigidity is not significantly reduced Underside (6.1.1 (c) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Inside Behind Repair Patch (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Body panel slightly loose Quarter & Corroded (6.2.1 (a) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Inside Behind Repair Patch (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Body panel slightly loose Quarter & Corroded (6.2.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Underside (6.1.1 (c) (i))

Rear Lower Engine mounting damaged but not to excess Debonding (6.1.8 (a) (i))

Underside Covered in Underseal

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Tyre worn close to legal limit/worn on edge both rear on limits (5.2.3 (e))

corrosion to underside of vehicle

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

handbrake has little reserve travel

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe (5.3.6 (a) (i))

Front head lamps going dull

hand brake leaver low on travel

Offside Rear tyre damage but not excessive

ridge worn into tyrewall offside rear innerwall

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

ridge worn into tyrewall offside rear innerwall

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Brake linkage has abnormal movement of levers indicating excessive wear (3.5.1f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

rear exhaust mounting bracket broken off

both front tyres worn on inner edges to diffrent layer of tyre rubber

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

rear exhaust mounting bracket broken off

both front tyres worn on inner edges to diffrent layer of tyre rubber

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

EML on

Offside rear park brake showing low efficiency

all 4 tyres worn on inner shoulders, rears getting close to limit

Offside Rear wheel bearing has excessive play (2.6.2)

Offside Rear wheel bearing rough when rotated (2.6.1)

all 4 tyres worn on inner shoulders, rears getting close to limit

offside rear park brake slightly lazy, caliper sticking slightly

Offside Rear Braking system leaking (3.6.A.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front and rear discs rusted

rear tyres wearing low

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)