MOT Status
ExpiredMileage
62,568 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge bald on inner edge (5.2.3 (e))
Offside Rear Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive trans (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases rear box (6.1.2 (a))
multiple areas of corrosion ( chassis and components )
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded (6.2.2 (d) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge bald on inner edge (5.2.3 (e))
Offside Rear Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive trans (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases rear box (6.1.2 (a))
multiple areas of corrosion ( chassis and components )
Front Windscreen damaged but not adversely affecting driver's view chipped (3.2 (a) (i))
Front washer jets poor
Nearside Front Sub-frame mounting modified but not seriously weakened corroded (5.3.3 (c) (i))
Nearside Outer sill corroded
Offside Front Sub-frame mounting modified but not seriously weakened corroded (5.3.3 (c) (i))
Offside Outer sill cororded
Offside Rear Inner arch corroded
Rear Exhaust mounting defective (6.1.2 (a))
Rear both axle bushes worn
coolant level low
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front washer jets poor
Nearside Front Sub-frame mounting modified but not seriously weakened corroded (5.3.3 (c) (i))
Nearside Outer sill corroded
Offside Front Sub-frame mounting modified but not seriously weakened corroded (5.3.3 (c) (i))
Offside Outer sill cororded
Offside Rear Inner arch corroded
Rear Exhaust mounting defective (6.1.2 (a))
Rear both axle bushes worn
coolant level low
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
general underside corrosion.
nearside rear inner wheel arch corroded.
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan by subframe (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis rail (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/inner wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper arch inner lower (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wheel arch round cap area more then one place (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis rail (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre outer sill (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
corroison outer/inner sills and floor pans
corrosion to outer sill/door shut
corrosion to rear chassis rails heavy
heavy corrosion to all inner wheel arches more then one place
petrol cap seal poor
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Road wheel badly distorted (5.2.2 (c) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Lower Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Lower Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
OV08 CXZ is a 2008 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 57.7%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying OV08 CXZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of OV08 CXZ?
You can check the full history of OV08 CXZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was OV08 CXZ registered?
OV08 CXZ is a 2008 Ford Ka, first registered on 28 March 2008.
Is OV08 CXZ safe to buy?
The MOT history for OV08 CXZ shows 26 tests with a 57.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does OV08 CXZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on OV08 CXZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.