2008 Ford Ka

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive flitch slightly corroded (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive flitch slightly corroded (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Front Emissions unable to be completed (8.2.2.2 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Seat belt installation anchorage insecure crossion on sills 2 floor pan made ov bodey filler full length iner outers paches poor (10.1 (d))

Front Brake disc in such a condition that it is seriously weakened da (1.1.14 (a) (ii)) DANGEROUS

Front Suspension arm insecure and impairing directional stability wish bones (5.3.3 (a) (ii)) DANGEROUS

Front Suspension arm likely to fail both front buishe rea axel bushes on besm braking up (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and floor (5.3.6 (a) (i))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

rear body corroded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Under body corrosion

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement forward (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 3.5mm (5.2.3 (e))

Nearside Front bumper damaged

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front bumper damaged

Front tyres wear on inner edge

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear (2.4.G.2)

Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear (2.4.G.2)