2008 Ford Ka

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounitng (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge and cracks in tread (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))

Emissions not tested exhaust leaking (8.2.1.2 (d))

Exhaust system insecure (6.1.2 (a))

Nearside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Rear Sub-frame pin or bush excessively worn axle bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded though (5.3.6 (a) (i))

Nearside Front Brake hose damaged and likely to fail rubbing on wheel rim (1.1.12 (a)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Suspension bush failing rubber bush to longer bonded securely as manufactured (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated leaking grease (5.3.4 (b) (i))

Offside Front brake hise slightly rubbing on wheel rim (not damaged)

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement axle bush failing rubber bush to longer bonded securely as manufactured (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Handbrake on threshold of limit (1.2.1 (c))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair axle on threshold of limit (1.2.1 (c))

Both rear axle bushes have play

underside of vehicle showing signs of corrosion

Both rear axle bushes have play

underside of vehicle showing signs of corrosion

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

minor oil leak

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear arm bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear arm bush (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Rear fog lamp not working (1.3.2b)

Rear fog lamp switch faulty (1.3.1a)

Rear fog lamp tell tale not working (1.3.1b)

165/65/13 nearside rear tread cracking

Oil leak

Offside Rear position lamp(s) not working (1.1.A.3b)

small cut on n/s front outer tyre wall

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

small cut on n/s front outer tyre wall