2012 Chrysler-jeep Compass

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

both rear tyre worn inside edges

Fuel system component leaking fuel filter (6.1.3 (b) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

both rear tyre worn inside edges

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Play in steering rack inner joint(s) ()

Standard fitment seat belt missing rear seat belts not tested ()

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Play in steering rack inner joint(s) ()

Standard fitment seat belt missing rear seat belts not tested ()

Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Coolant leak bottom right corner of rad leaking coolant ()

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s/r trailing arm bush going soft (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Coolant leak bottom right corner of rad leaking coolant ()

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s/r trailing arm bush going soft (5.3.4 (a) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated n/s/f ARB link bottom joint gator split (5.3.4 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes worn (5.3.4 (a) (i))

Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement both rear top suspension arms outer bush has play when pushed and pulled (5.3.4 (a) (i))

evidence of a slight coolant leak collecting on bottom right-hand corner of radiator

Front Suspension arm ball joint excessively worn both front bottom arms ball joints have excessive play (5.3.4 (a) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated n/s/f ARB link bottom joint gator split (5.3.4 (b) (i))

Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement both rear top suspension arms outer bush has play when pushed and pulled (5.3.4 (a) (i))

evidence of a slight coolant leak collecting on bottom right-hand corner of radiator

Front Fluid leak, but not excessive radiator has a slight leak in bottom drivers side corner (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s/r trailing arm bush worn but not excessive (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement o/s/r trailing arm bush worn and just started to crack (5.3.4 (a) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement o/s/r upper arm bushes have play when wheel is pushed and pulled (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

no print out was produced due to low emissions

surface corrosion of rear beam axle

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too high (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

no print out was produced due to low emissions

surface corrosion of rear beam axle