2000 Aprilia RX50

Direction indicators not working not checked due to switch missing (1.5.1c)

Drive chain excessively loose (6.2.1d)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake hose excessively deteriorated (3.2.B3b)

Front Brake lever is inoperative (3.1.3c)

Fuel cap sealing washer missing (7.2.2c)

Handlebar handgrip missing (2.1.1c)

Headlamp insecure (1.2.3b)

Horn missing switch missing (1.7.1)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp emits other than a steady red light cover missing (1.3.1b)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Stop lamp remains on when the brake is released (1.3.1e)

brakes not checked due to no pads fitted to front and condition of rear brake disc/pads

lights not checked due to no light switch

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake hose slightly deteriorated (3.2.B3b)

Rear Brake disc(s) slightly scored (3.2.A1l)

Direction indicator missing (1.5.1a)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front shock absorber seal failed and leaking oil (2.3.3)

Front wheel bearings have excessive free play (2.3.5b)

Handlebar deformed (2.1.1b)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp insecure (1.2.3b)

Horn not working (1.7.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp insecure (1.1.1c)

Rear reflector on motorcycle obscured (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate deteriorated (6.3.1d)

Offside Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake hose slightly deteriorated (3.2.B3b)

Rear Brake disc(s) slightly scored (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

rear footrest brackets fitted upside down

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension has poor rebound

Front tyre valve has lock nut missing

Front wheel bearings have slight free play (2.3.5b)

Handlebar brace loose

Rear drive sprocket very worn

Rear suspension has a lot of sag

Steering movement slightly 'notchy' (2.2.1b)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Drive chain sprocket worn to excess (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension has poor rebound

Front tyre valve has lock nut missing

Front wheel bearings have slight free play (2.3.5b)

Handlebar brace loose

Rear drive sprocket very worn

Rear suspension has a lot of sag

Steering movement slightly 'notchy' (2.2.1b)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Wheel spoke missing (4.2.1b)

Headlamp aim too high (1.6)

Horn is not a constant note (1.7.3c)

Rear Direction indicators not working (1.5.1c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear reflector on motorcycle missing (1.4.1)