2004 Honda Civic

Brake disc worn, pitted or scored, but not seriously weakened BOTH SIDES REAR (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened & REAR (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Coil spring corroded & BOTH REAR (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement FRONT BUSH (5.3.4 (a) (i))

Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced BOTH SIDES REAR MOUNTING POINTS (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened ALL FRONT & REAR (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension arm pin or bush excessively worn FRONT BUSH (5.3.4 (a) (i))

Rear Exhaust has a major leak of exhaust gases BOX JOINT (6.1.2 (a))

Brake disc worn, pitted or scored, but not seriously weakened BOTH SIDES REAR (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened & REAR (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Coil spring corroded & BOTH REAR (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement FRONT BUSH (5.3.4 (a) (i))

Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced BOTH SIDES REAR MOUNTING POINTS (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened ALL FRONT & REAR (5.3.3 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive BOOT FLOOR (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR OUTER SILLS (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR SILL CLOSING PANEL (5.3.6 (a) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR (5.3.6 (a) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced BOTH SIDES REAR INNER SILLS & SILL CLOSING PANELS (7.1.1 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH SIDES REAR INNER SILL SUSPENSION ARM MOUNTINT POINT (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive BOOT FLOOR (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR OUTER SILLS (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR SILL CLOSING PANEL (5.3.6 (a) (i))

Suspension spring mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR (5.3.6 (a) (i))

Central Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive BOTH SIDES SILL TO FLOOR (7.1.1 (a) (i))

Suspension arm corroded but not seriously weakened BOTH SIDES FRONT (5.3.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES FRONT, FRONT BUSHES (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES REAR TRAILING ARM MOUNTING POINTS (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front mounting (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear rear brake binding (3.7.B.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)