2008 Ford Ka

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge tread also perished/cracked (5.2.3 (e))

corrosion around filler neck

Nearside Front Hydraulic brake calliper insecurely mounted retaining clip not correctly located (1.1.16 (c) (i))

Nearside Front Seat belt anchorage loose seat base not securely bolted down, bolts loose (7.1.1 (b))

Nearside Headlamp aim too high and too far to the right. (4.1.2 (a))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting, floor corroded (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge tread also perished/cracked (5.2.3 (e))

corrosion around filler neck

Front very small chip/crack in front screen

Nearside Front Tyre worn close to legal limit/worn on edge near cords on outer edges (5.2.3 (e))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor near vin number (6.1.1 (c) (i))

engine oil leak

surface rust around fuel filler neck and fuel tank starting to rust

Brake fluid contaminated (1.8 (a))

Front very small chip/crack in front screen

Nearside Front Tyre worn close to legal limit/worn on edge near cords on outer edges (5.2.3 (e))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor near vin number (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

engine oil leak

surface rust around fuel filler neck and fuel tank starting to rust

Offside Front Tyre worn close to legal limit/worn on edge inner edge close to cords (5.2.3 (e))

Nearside Floor excessively deteriorated seat mounting bolt area on n/s/f seat (6.2.4 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hole (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting axle mounting area (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch / sill area near axle mount (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge close to cords (5.2.3 (e))

Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

BOTH windscreen wipers leave light lines

Items removed from driver's view prior to test ()

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front tyre 2mm tread depth in areass

Offside Front Tyre worn close to the legal limit in areas (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust system corroded in areas

Engine covers fitted obscuring some components in the engine bay

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Under-trays fitted obscuring some underside components

offside rear tyre sidewall perished

Both front tyres wearing on inner and outer edges

Front tyres perishing