2002 Kawasaki ER5

Central Front Upper Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Forks slightly corroded Some rust spots and light misting of oil to stanchions. (2.2.2 (d) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Direction indicator obviously incorrectly positioned less than 300mm apart (4.4.3 (a))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain slightly loose Long travel on foot brake (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front tyre perished in treads

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Direction indicators not working wire broken (1.5.1c)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Horn not working (1.7.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

plug repair in rear tyre

Headlamp aim too low (1.6)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain slightly loose (6.2.1d)

Rear wheel bearings have slight free play (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))