2002 Suzuki GSF600

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Central Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Offside Front Brake caliper leaking caliper (1.1.16 (b) (i))

Offside Front Upper Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Central Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Steering operation restricted in free movement from lock to lock wiring loom (2.1.4 (c))

Registration plate does not conform to the specified requirements small (0.1 (d))

Front Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) has slight run out (3.2.A1m)

Rear Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Nearside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain slightly loose (6.2.1d)