2004 Honda CBR125R

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Nearside Front All direction indicators slightly discoloured (4.4.3 (a))

Nearside Rear All direction indicators slightly discoloured (4.4.3 (a))

Offside Front All direction indicators slightly discoloured (4.4.3 (a))

Offside Rear All direction indicators slightly discoloured (4.4.3 (a))

front brake binding slightly when turned by hand.Roller test ,ok.

front fork seals weeping slightly.

Drive chain worn to excess (6.2.1e)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Upper Fairings insecure and likely to impede the steering (2.1.2e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front Footrest insecure (6.2.1a)

Nearside Rear Direction indicator not working (1.5.1c)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Direction indicator insecure (1.5.3b)

Offside Rear Footrest insecure (6.2.1a)

Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

N/S Foot rest meets only minimum requirements

Outer Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

N/S Foot rest meets only minimum requirements

Nearside Headlamp aim too high (1.6)

Outer Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake hose fouling (3.2.B3b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front suspension assembly component excessively misaligned (2.3.1)

Nearside Headlamp aim too high (1.6)

Offside Front Direction indicator insecure (1.5.3b)

Offside Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Riders seat insecure (6.2.1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain slightly tight (6.2.1d)