2007 Mercedes-benz Clk

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

slight play in o/s/f track rod arm

general corrosion under vehicle

Front Registration plate inscription illegible (0.1 (b))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

general corrosion under vehicle

n/s outer sill damaged

general light corrosion under rear of vehicle

Brake hose slightly deteriorated front and rear (1.1.12 (b) (ii))

Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

front tyres worn on outer edges

Brake hose slightly deteriorated front and rear (1.1.12 (b) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

general corrosion under vehicle

Rear Registration plate inscription illegible (0.1 (b))

Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

light corrosion to rear suspension

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Nail in tyre

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Nail in tyre

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

general light corrosion to rear suspension

general light corrosion to rear suspension

rear brake pads getting low

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

general light corrosion to rear suspension

rear brake pads getting low

Front inner pads getting low

Nearside rear tyre getting low

Offside front tyre worn on edges

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components