2003 Seat Alhambra

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Non obligatory mirror damaged

Oil leak

Passenger seat(s) missing at time of test

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear tyre inner sidewall perished

Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Non obligatory mirror damaged

Oil leak

Passenger seat(s) missing at time of test

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Wheel bolt(s) missing (4.2.A.1e)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Track rod end ball joint has slight play (2.2.B.1f)

nearside rear tyre inner sidewall deteriorated

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Outer Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

offside rear tyre perished

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Direction indicator slightly discoloured (1.4.A.2f)

Offside Outer Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Road wheel with a slightly distorted bead rim (4.2.A.1a)

rear brake discs worn and pads wearing thin

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Steering system has slight free play detected at steering wheel (2.2.A.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear All position lamps not working (1.1.A.3b)