2006 Ford Ka

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount and rear seat belt mounts (5.3.6 (a) (i))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced corroded (7.1.1 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear axle mount and neat seat belt mount s (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle 38 % (1.2.1 (b) (i))

Rear Bumper insecure mounting points missing and also corroded (6.1.4 (a) (i))

Rear Spare wheel carrier insecure Mounting points severely corroded (6.1.5 (a))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced panel behind bumper also by spare wheel carrier mount (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Worn beyond service specification Only just met the requirements for MOT Replace/repair ASAP (1.1.14 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Power steering not very effective Only just met the requirements for MOT Replace/repair ASAP

Rear centre section of bumper insecure

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear centre section of bumper insecure

All prescribed areas corroding

Offside Rear Inner wheel arch corroded

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Front bush (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

All prescribed areas corroding

Offside Rear Inner wheel arch corroded

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Rear Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Items removed from swept area prior to test.

Nearside Front Lower suspension arm rear bush incorrectly fitted but not imparing function.

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Items removed from swept area prior to test.

Nearside Front Lower suspension arm rear bush incorrectly fitted but not imparing function.

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

near side front inner wheel rim has slight damage

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

near side front inner wheel rim has slight damage

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)