2008 Audi A4

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Upper Suspension rod pin or bush worn but not resulting in excessive movement inner both arms (5.3.4 (a) (i))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Upper Suspension rod pin or bush worn but not resulting in excessive movement inner both arms (5.3.4 (a) (i))

Rear Brake disc worn, but not excessively slight (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Rear arm inner bush (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Rear arm inner bush (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Coil spring fractured or broken bottom coil broken off (5.3.1 (b) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords deep cut to cords (5.2.3 (d) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen washer provides insufficient washer liquid x 2 (3.5 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

engine cover and under-trays fitted obscuring some components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

large cut to nsf tyre inner sidewall

nsf road wheel slightly distorted

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)